هڪ عام صنعتي سامان جي طور تي، جي نا مناسب آپريشن ۽ سار سنڀال ورهايل ڪيسنگ پمپ اڪثر استعمال دوران پمپ کي مختلف نقصانن جو سبب بڻجن ٿا، ۽ سخت ڪيسن ۾ پيداوار جي حفاظت ۽ ڪارڪردگي کي به متاثر ڪن ٿا. اهو آرٽيڪل ڪيترن ئي عام رويي جي ڳولا ڪندو ۽ پمپ کي نقصان جي سببن جي کوٽائي ۾، مقصد جو مقصد صارفين کي انهن جي آپريشن ۽ سار سنڀال جي شعور کي بهتر بنائڻ ۾ مدد ڏيڻ، ان ڪري ناڪامي جي واقعن کي گهٽائڻ ۽ سامان جي خدمت جي زندگي کي وڌائڻ.

Common practices for damaging pumps are as follows:

1. Overload Operation

سبب:Exceeding the rated flow and head of the ورهايل ڪيسنگ پمپ وڏي وقت لاءِ.

اثرOverheating, increased wear, shortening the life of the pump.

طريقاCheck the working parameters of the pump regularly and reselect the model if necessary.

2. غلط تنصيب

سبب:Improper installation position or unreasonable pipeline design.

اثرCavitation, vibration and uneven load affect the efficiency of the pump.

طريقاWhen installing the pump, not only refer to the manufacturer's installation guide, but also ensure that the inlet and outlet of the pipeline are unobstructed to prevent vibration and uneven load.

3. سار سنڀال جي کوٽ

سبب:Failure to perform regular maintenance and inspection.

اثرIncreased wear or corrosion, leading to failure.

طريقاDevelop and strictly follow the maintenance plan, and regularly check and replace lubricants, seals, and bearings to avoid failures caused by wear and corrosion.

4. Unsuitable Media

سبب:Conveying corrosive or solid-particle-containing media.

اثرDegradation of the pump casing and impeller.

طريقاجڏهن خريد ڪري هڪ ورهايل ڍڪڻ پمپ، احتياط سان منتقل ٿيل وچولي جي خاصيتن جو تجزيو ڪيو ۽ هڪ مناسب پمپ ماڊل ۽ مواد چونڊيو، خاص طور تي corrosive يا سڪل-ذري تي مشتمل ميڊيا لاء.

5. Air Inhalation

سبب:The pump is installed too high, the water inlet pipe leaks, etc.

اثرCavitation, resulting in reduced flow and head.

طريقاRegularly check the water inlet pipe to ensure that there is no air leakage to avoid cavitation and reduced efficiency caused by air inhalation.

6. Closed Valve Operation

سبب:The split casing pump is running with the outlet completely closed.

اثرHigh temperature and pressure, damage to the pump body and seal.

طريقاInstall a bypass valve to ensure that the pump operates under normal load and avoid overheating and damage when the pump is running with the outlet completely closed.

7. کمپن

سبب:Unstable or uneven foundation, improper installation.

اثرSevere vibration can cause pump parts to loosen or be damaged.

طريقاBefore installation, make sure the pump has a stable foundation. If necessary, use shock-absorbing measures to reduce the impact of vibration on the equipment.

8. ناکافي کولنگ

سبب:The pump is running in a dry environment or the water level is too low.

اثرThe motor overheats, causing burnout or damage.

طريقاCheck the cooling system regularly to ensure that the pump is running in a suitable environment to avoid motor burnout due to lack of water or heat accumulation.

9. Not Considering Environmental Factors

سبب:Installation in an environment that is too humid or dusty.

اثرThe pump's motor and cables may be damp or clogged with dust.

طريقاChoose appropriate protective measures according to the installation environment to prevent moisture and dust from damaging the motor and cables.

تقسيم ڪيسنگ پمپ جو مؤثر آپريشن سائنسي آپريشن ۽ محتاط سار سنڀال کان الڳ نه آهي. صحيح تنصيب ۽ استعمال جي هدايتن تي عمل ڪندي، باقاعده سار سنڀال ڪرڻ ۽ مناسب حفاظتي اپاء وٺڻ سان، اسان پمپ کي نقصان جي خطري کي خاص طور تي گھٽائي سگھون ٿا، ان جي ڪم ڪندڙ ڪارڪردگي کي بهتر بڻائي ۽ ان جي خدمت جي زندگي کي وڌايو.